Nissan Maxima Workshop Manual 2006 (9) PDF | Page 18

CL-18
SERVICE DATA AND SPECIFICATIONS (SDS)
Revision: October 2006 2006 Maxima
SERVICE DATA AND SPECIFICATIONS (SDS) PFP:00100
Clutch Control System
ECS009SW
Clutch Master Cylinder
ECS009SX
Unit: mm (in)
Clutch Operating Cylinder
ECS009SY
Unit: mm (in)
Clutch Disc
ECS009SZ
Clutch Cover
ECS009T0
Type of clutch control Hydraulic
Inner diameter 15.87 (5/8)
Length "L" of clevis on pushrod 119.5 (4.70)
SCIA5158E
Inner diameter 17.46 (11/16)
Model 250
Facing size (Outer dia. inner dia. thickness) 250 mm 170 mm 3.2 mm (9.84 in 6.69 in 0.126 in)
Thickness of disc assembly
(With load)
7.4 mm (0.291 in) with 8340 N (850 kg, 1875 lb)
Wear limit of facing surface to rivet head 0.3 mm (0.012 in)
Facing runout limit 0.7 mm (0.028 in)
Distance of runout check point (from the hub center) 240 mm (9.45 in)
Maximum spline backlash (at outer edge of disc) 1.0 mm (0.039 in)
Model 250
Set load 8,340 N (850 kg, 1875 lb)
Set height 40.5 mm (1.59 in)
Uneven limit of diaphragm spring toe height 1.0 mm (0.039 in)