CLUTCH DISC, CLUTCH COVER AND FLYWHEEL
Revision: October 2006 2006 Maxima
Inspection and Adjustment after Removal
? Check clutch disc for wear of facing.
? Check clutch disc for backlash of spline and runout of facing.
? Check clutch disc for burns, discoloration or oil or grease leak-
age. Replace if necessary.
? Check clutch cover installed on vehicle for unevenness of dia-
phragm spring toe height.
? If out of limit, adjust the height using Tool.
? Check contact surface of flywheel for slight burns or discolora-
tion. Repair flywheel with emery paper.
? Check the flywheel runout. Refer to EM-143, "FLYWHEEL
RUNOUT (M/T)" .
Wear limit of facing sur-
face to rivet head
: 0.3 mm (0.012 in)
Maximum backlash of spline
(at outer edge of disc)
: 1.0 mm (0.039 in)
Runout limit : 0.7 mm (0.028 in)
Distance of runout check point
(from hub center)
: 240 mm (9.45 in)
Uneven limit : 1.0 mm (0.039 in)