Revision: July 2005 2005 Maxima
AFTER A COLLISION
Inspect all seat belt assemblies including retractors and attaching hardware after any collision.
NISSAN recommends that all seat belt assemblies in use during a collision be replaced unless the col-
lision was minor and the belts show no damage and continue to operate properly. Failure to do so
could result in serious personal injury in an accident. Seat belt assemblies not in use during a colli-
sion should also be replaced if either damage or improper operation is noted. Seat belt pre-tensioner
should be replaced even if the seat belts are not in use during a frontal collision in which the air bags
Replace any seat belt assembly (including anchor bolts) if:
? The seat belt was in use at the time of a collision (except for minor collisions and the belts, retractors and
buckles show no damage and continue to operate properly).
? The seat belt was damaged in an accident. (i.e. torn webbing, bent retractor or guide).
? The seat belt attaching point was damaged in an accident. Inspect the seat belt attaching area for damage
or distortion and repair as necessary before installing a new seat belt assembly.
? Anchor bolts are deformed or worn out.
? The seat belt pre-tensioner should be replaced even if the seat belts are not in use during the collision in
which the air bags are deployed.